Table of Contents

Last Updated: October 18, 2026

Workplace First Aid Requirements in Queensland

Workplace first aid compliance Gold Coast employers must meet starts with one principle: every Queensland workplace needs first aid arrangements that match its actual risks, workforce and location. This guide from Provide First Aid Gold Coast translates the legal duties into practical steps for site managers, childcare directors, club administrators and contractors.

Two documents set the frame. According to the Work Health and Safety Act 2011, the PCBU must provide first aid equipment, facilities and trained personnel so far as reasonably practicable.

The WHS Act and the First Aid Code of Practice

The Code is not law in itself, but courts and regulators treat it as the benchmark for what “reasonably practicable” looks like. Fail to follow it and you carry the burden of explaining why.

What the PCBU Must Provide

At minimum, a compliant workplace has:

  • Adequate first aid kits, checked and restocked
  • Trained first aiders available during all work hours
  • Clear procedures for summoning help and ambulance access
Watch OutThe most common gap we see is coverage, not equipment. A well-stocked kit is useless if the only trained first aider is on leave or working a different shift.

How to Run a First Aid Risk Assessment for Your Site

First aid compliance begins with a documented risk assessment, not a shopping list. The First Aid in the Workplace Code of Practice expects the assessment to be specific to your site, your tasks and your people, and to be reviewed when any of those change.

Walk the site, identify hazards, then size your arrangements to the findings. A defensible assessment records five things:

  1. Site layout and response distances, note the distance from each work area to the nearest first aid kit, first aid room (if any) and ambulance access point. On a multi-level site, record vertical distance and lift access, not just straight-line metres.
  2. Hazards by task, list the tasks that could produce serious injury: electrical work, work at height, plant and forklift interaction, chemical handling, manual handling, hot works, and lone or remote work. Match each hazard to the first aid skill and equipment needed to stabilise it.
  3. Workforce numbers per shift, count workers, contractors and visitors separately. A site with 40 day-shift workers and 8 night-shift workers has two different coverage problems, not one.
  4. Emergency access and communications, confirm ambulance vehicle access, the nearest hospital with an emergency department, and mobile coverage in every work area. Where coverage is patchy, record the alternative (UHF radio, satellite messenger, designated check-in intervals).
  5. Review triggers, record what will prompt a review: a first aid incident, a change in layout or plant, a new hazardous task, a change in shift structure, or a near miss.
Site supervisor and colleague checking first aid compliance stations on a construction site with a clipboard.
Site supervisor and colleague checking first aid compliance stations on a construction site with a clipboard.

Translating hazards into arrangements by industry

The Code expects your arrangements to reflect the difference between industries, not just the size of the workforce. The following examples show how the same five-step method produces different outcomes:

  • Construction, falls, electrical hazards, plant injuries and crush injuries dominate. Plan for trauma-trained first aiders, rapid ambulance access to each work front, and a defibrillator within a short response time of the tallest work area.
  • Hospitality and tourism, burns, scalds, slips, allergic reactions and cardiac events in public areas. Front-of-house staff are often the first responders, so train enough of them to cover every service period, and locate kits where staff can reach them without leaving guests unattended.
  • Offices, low-frequency but high-consequence cardiac events and falls. The risk assessment is less about hazard density and more about response time: how long until a trained first aider and a defibrillator reach the furthest desk or meeting room.
Watch OutA common pattern is a risk assessment that lists hazards but never connects them to a specific arrangement. If the document cannot answer “which first aider, which kit, which equipment, and how fast?” for your highest-risk task, it is not yet doing its job.

Documenting and reviewing the assessment

Record your conclusions in a dated document that names the assessor, the hazards identified, the arrangements chosen and the reasoning behind them. Review it at least annually, after any first aid incident or near miss, and whenever the site layout, plant, tasks or shift structure changes. Keep the superseded versions, a regulator or auditor will want to see the assessment that was in force at the time of an incident, not just the current one.

First Aid in the Workplace Code of Practice

First Aid Officer Requirements in the Workplace

Queensland does not set a fixed ratio of first aiders to workers. Instead, the Code directs you to consider workforce size, shift patterns, hazard profile and distance from medical help.

In practice, most practitioners find that the bare minimum is not enough. A single trained first aider per site looks adequate on paper until that person takes leave, changes shift, or is working at the far end of the site when an incident occurs.

Building a first aider coverage matrix

A coverage matrix maps each shift and work area to the trained first aiders available, so gaps are visible before they become incidents. Build one by listing:

  • Shifts and service periods, day, afternoon, night, weekend, and any split or on-call arrangements.
  • Work areas or zones, each building, floor, yard, field or remote location.
  • Trained first aiders per zone per shift, name, qualification code and expiry date.

Review the matrix at every roster change, not just annually. Leave, resignation, promotion and shift swaps are the most common causes of silent coverage failure.

Covering leave, absence and turnover

Plan for absence as a normal condition, not an exception. A workable approach is to train a buffer above your minimum, enough extra first aiders that one or two absences per shift do not leave a zone uncovered.

Turnover matters too. If your trained first aiders are concentrated in long-serving staff, a single resignation can strip cover from a shift.

Call us to book your course →

Multiple sites, contractors and remote crews

  • Multiple sites, treat each site as its own coverage problem. A first aider at Site A cannot cover Site B, even if both are managed by the same business. Record the coverage plan per site and note any shared arrangements explicitly.
  • Contractors, contractors bring their own WHS duties, but your primary duty of care extends to them while they are on your site. Confirm in writing whether they provide their own first aid cover or rely on yours, and record the answer in your coverage matrix.
  • Remote and lone workers, where a first aider cannot be physically present, build in check-in procedures, confirm communications coverage before work starts, and define the response if a check-in is missed. For prolonged response times, train for stabilisation rather than rapid handover.
Pro TipA simple test of your coverage plan: pick the highest-risk task on your site and ask who the designated first aider is at 2am on a Sunday, how long they would take to reach the task area, and what equipment they would bring. If the answer is vague, the plan has a gap.

Keeping skills current, not just certificates current

A common mistake is treating the certificate as the whole job. A first aider who has never practised a defibrillator drill, never run a simulated choking response, or never located the kit under time pressure will hesitate when it counts. Build short, regular scenario practice into your schedule, a defibrillator drill at the start of a shift, a kit location walk-through for new starters, a tabletop run-through of the emergency procedure, so that skills stay current between formal refreshers.

First Aid in the Workplace Code of Practice

First Aid Training and Qualification Pathways

Training must be nationally recognised and delivered by a Registered Training Organisation. The core qualifications are HLTAID009 for CPR, HLTAID011 for Provide First Aid, and HLTAID014 for advanced first aid. CPR skills need refreshing annually, and first aid certificates typically carry a three-year currency.

Pro TipBook refresher training before certificates lapse, not after. Chasing expired certifications across a workforce is far more disruptive than scheduling ahead.

Your Workplace First Aid Compliance Checklist

Use this checklist as a working audit tool. A workplace first aid compliance checklist should be reviewed at least annually and after any significant change.

Area

What to Check

Frequency

Risk assessment

Documented and current

Annually

Trained first aiders

Every shift covered

Each roster change

First aid kits

Stocked and in date

Monthly

Training records

Certificates current

Quarterly

Emergency procedures

Posted and understood

Annually

Incident records

Completed and reviewed

Per incident

First Aid Certification Tracking Without the Spreadsheet Chaos

First aid certification tracking is where compliance quietly falls apart. Spreadsheets work until someone leaves, a file is misplaced, or a certificate expires unnoticed.

Our mobile training model helps here. We come to your site with all equipment, train your team in their own environment, and work around shift patterns so coverage never lapses. As a training partner of Healthcorp (RTO ID 91222), we deliver practical, hands-on sessions.

Industry Risk Profiles: Construction, Mining, Childcare and Sport

Risk profiles differ sharply. Construction sites face falls, electrical hazards and plant injuries, so advanced first aid and rapid ambulance access planning matter. Mining carries remote-location risk and requires strong emergency response. Childcare centres deal with choking, allergic reactions and childhood injuries, where CPR confidence is essential. Sporting clubs face collision and cardiac events, making defibrillator access and CPR training non-negotiable.

Key TakeawayMatch your training mix to your highest-risk scenario, not the average one. That is where compliance and genuine readiness meet.

Conclusion

First aid compliance is a moving target: rosters change, certificates expire, and sites evolve. The businesses that stay compliant are the ones that plan training around their real risk profile rather than reacting after an audit. Provide First Aid Gold Coast brings nationally recognised training to your site, with experienced trainers, all equipment provided, and scheduling that fits your shifts.


Frequently Asked Questions

What are the workplace first aid requirements in Queensland?

Queensland employers hold a duty under the Work Health and Safety Act 2011 to provide first aid arrangements that are reasonable for their risk profile. The First Aid in the Workplace Code of Practice sets out how to meet that duty: assess hazards, decide on kits, facilities and trained personnel, then review arrangements regularly. The number of trained first aiders, the contents of kits and whether a first aid room is needed all depend on your workplace size, workforce and hazards, so there is no single fixed formula.

How many first aid officers does a workplace need?

There is no fixed ratio in the Code of Practice. The number depends on your risk assessment: how many workers are on site, how shifts are structured, how far the workplace is from emergency services, and how hazardous the work is. A high-risk construction site with multiple crews will need more trained first aiders than a small office. Plan for coverage across every shift and leave room for leave, turnover and site transfers so you are never left without a current certificate on the floor.

What first aid training should workplace first aid officers have?

Most workplaces need at least one person trained in Provide First Aid (HLTAID011), which includes CPR. High-risk or remote sites often add Provide Advanced First Aid (HLTAID014) for a nominated officer. Training must come from a Registered Training Organisation so the certificate is nationally recognised. Check that the course covers your actual risks, such as rescue from a live low voltage panel for electrical crews, and confirm the trainer delivers practical, hands-on training rather than theory only.

How often should first aid qualifications be renewed?

CPR refreshes every 12 months and the full Provide First Aid certificate every three years, in line with the units HLTAID009 and HLTAID011. Many employers schedule annual CPR updates for all first aiders so skills stay current and coverage never lapses. Build renewal dates into your certification tracking system and book refreshers at least a month before expiry. Waiting until the certificate lapses leaves a gap in your compliance record that an audit will pick up.

What should a workplace first aid compliance audit include?

A practical audit checks four areas: trained personnel (current certificates, adequate numbers, shift coverage), equipment (kit contents complete, stocked and in date, first aid room condition), access (clear signage, ambulance access, emergency contacts displayed), and records (training register, incident reports, review dates). Walk the site and verify what is actually there rather than relying on paperwork. Note any gaps with an owner and a due date, then re-check at the next scheduled review.

How can employers keep track of staff first aid certifications?

Move away from spreadsheets and shared inboxes. A simple register should hold each person’s name, qualification code, issue date, expiry date and site, with automatic reminders at 90, 60 and 30 days before expiry. Assign one person to own the register and review it monthly. When booking refreshers, group staff by site and shift so training does not create coverage gaps. On-site mobile training can also cut the admin burden by certifying whole teams in one visit.